Fulgor Milano F6PDF486GS1 Dual Fuel Range, 48 inch Exterior Width, Self Clean, Convection, 6 Burners, 7.1 cu. ft. Capacity, 2 Ovens, Stainless Steel colour Griddle, True European Convection, Temperature Probe, Soft Close Door, Telescopic Gliding Extension Rack
Professional ranges / Dual Fuel Ranges
48'' DUAL FUEL PROFESSIONAL RANGE (F6PDF486GS1)
Thoughtfully designed surface cooking with six burner positions, each with a 5 in 1 Crescendo burner beneath continuous cast-iron grates and a Trilaminate Stainless Steel griddle, providing unparalleled power and control to melt, simmer, saute, and sear as you desire.
Below the cooking surface, two self-cleaning convection ovens with intuitive multiple baking and broiling functions and the convenience of telescoping racks encourage you to cook the way you want.
But that's not all: you can create your personalized nameplate for the oven door!
- Cast Iron Grates
- Built to withstand searing heat and rapid temperature changes without losing their strength, continuous cast iron grates allow pans to be easily repositioned at your convenience.
- Dual Burner With Brass Burner Ring
- For perfect control, easy cleaning, and lasting performance, the brass burner ring and the precision flame ports remain corrosion free.
- Forte
- At the peak of its 20,000 BTU capability, meat is seared to produce a crust worthy of your favorite chef. Large pots quickly recover to a rigorous boil, and no culinary conquest seems unattainable. All burner rings engage to produce the most powerful flame for cooking.
- Mezzo
- Creamy risotto and smooth custards come to life as the burner rings combine to provide enough heat to encourage the cooking but discourage scorching.
- Mezzoforte
- Perfect al dente pasta is a snap. Progressive control of the burner ensures maximum heat distribution without excessive flame for an even and moderate boil.
- Piano
- Melt butter, temper chocolate, or gently coax the flavor from savory vegetables, this lowest setting is achieved by the flame from the simmer burner rolling gently under the diffuser cap to radiate whisper soft heat.
- Pianoforte
- Simmer, poach, or braise your way to a tender sauce, soup or stew. Flame curls around the diffuser cap to barely brush the base of the cooking vessel with perfect control for extended periods of low heat cooking.
- Professionally Crafted
- This multifunction range, combines all the features of a fully-equipped professional range with a stainless steel design which highlights the elegance and uniqueness of Italian style.
- Robust Control Knobs
- A perfect match for the bold design of the control panel, robust brushed metal knobs ensure easy handling and precise control while cooking.
- Six Burners
- 6 cooking zones, each with Crescendo burners create 5 levels of cooking power. At each level, the perfect combination of power and even distribution of heat allows precise results from temper to sear at 20,000 BTU. A combination of burner rings at different levels controls the relation of the flame to the bottom of the cooking vessel, allowing whisper soft heat for melting or rendering to ultra high searing and deglazing.
- Sofia Is an Individual
- We designed a professional range with a style and presence unique to her name. Sofia integrates the use of stainless and brushed aluminum for a design that is elegant and distinctive.
- Total Access At Your Finger Tips
- Choose multiple baking functions, timed bake, meat probe, and a variety of other customizable settings and baking features.
- Total Control and Delicate Power
- Every aspect of Sofia is beautiful and her gas cooking surface is no exception. Every burner allows you to temper the most delicate chocolate or sear a steak to perfection.
- Trilaminate Griddle
- As if 6 powerful burners wasn't enough, the addition of a Trilaminate griddle allows additional versatility to the cooking surface. With 12,500 BTU's of even heat, Sofia sears with conviction and the easy to care for surface will be beautiful for its entire lifetime.
- 3 Heavy Duty, continuous cast iron grates
- Trilaminate Stainless Steel Griddle with
- Tubular Gas Burner
- 11,500 BTU high / 2,000 BTU low
- Matte finish porcelain burner bowl
- 6 Dual-Flame Crescendo Burners
- 2 X 20,000 BTU max (NG)
- 4 X 18,000 BTU max (NG)
- Natural Gas (LP convertible)
- Dual True Convection in main oven and
- True Convection in accessory oven
- Self-cleaning oven with Multifunction baking
- Black Porcelain enamel interior
- Cool to the touch, soft closing door
- Extra-large baking cavity and viewing area
- 3 Halogen lights on main oven
- 1 Halogen light on convenience oven
- Gross capacity 4.4 cu. ft. and 2.7 cu. ft.
- 2 chromed racks
- 1 telescopic rack per oven
- Bake
- Broil
- Roast
- Convection
- True Convection
- Warm / Proof / Dehydrate
- Electronic cooking programmer
- Meat Probe on main oven only
- Self-Clean
- Sabbath Mode
Manufacturer's Warranty: 2 years
EAN: 8019801019861
Basic installation and delivery services are available from CAS
Advanced Installation Services (After Delivery)
Offered by Quick Contractors®
CAS Suggested Installation Provider
1-877-694-3909
To book service online please visit quicktask.com/cas
SELECT CATEGORY FOR A LIST OF AVAILABLE INSTALLATION SERVICES
Refrigerator Installation Service (New Waterline) by Quick Contractors
Things to note:
- This service should be purchased if an entirely new waterline is required.
- If this is replacing your existing refrigerator, our delivery team will uncrate and move your new purchase into place. They will not plug it in.
- If there is open floor access, 60 feet of waterline will be included in the installation.
- The Quick Contractors installer will NOT remove packaging or provide haul away services.
- Refrigerator door reversal service can be added for an extra cost. Please contact your local store for details.
Gas Range Installation Service with New Flexible Hose by Quick Contractors
Things to note:
- This package does NOT include removal of any packaging.
- This service does NOT include haul away.
- Extra charges will apply if shut-off valves, gas permits or any custom carpentry work is needed to allow the new appliance to fit.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
Gas Dryer Installation Service with New Flexible Hose by Quick Contractors
Things to note:
- This service should be purchased if there was an existing gas dryer in place before.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
- The Quick Contractors installer will NOT remove packaging or provide haul away services.
- Extra charges will apply if any shut-off valves, gas permits, vent-less exhaust kits, conversion kits, vent hose, stacking of items, expansion and reduction adapters, or custom carpentry work is needed to allow the new appliance to fit.
White Glove Dryer (Electric only!) Installation
Things to note:
- Delivery person will complete this at the time of delivery.
- Additional charges will apply at point of purchase.
White Glove Washing Machine Installation
Things to note:
- Delivery person will complete this at the time of delivery.
- Additional charges will apply at point of purchase.
Dishwasher with Hose Installation and Haul Away Service
Things to note:
- Delivery person will pick-up and deliver the unit and remove its packaging.
- This is a basic installation into an existing outlet.
- A 6 feet stainless steel braided fill hose (supply line) is included with this installation service.
- Delivery person will haul away the old unit and dispose of all packing and materials.
- Extra charges will apply if any risers, air gaps, pigtails, elbows, on/off switches, working in crawl spaces, or custom carpentry work is needed to remove old unit.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
Dishwasher with Hose Installation Service
Things to note:
- This is a basic installation into an existing outlet.
- You must remove the packaging prior to the installation.
- Your unit should be placed near the intended installation site in advance of the Quick Contractor installer's arrival, unless appliance delivery has been purchased.
- Please disconnect your existing unit.
- A 6 feet stainless steel braided fill hose (supply line) is included with this installation service.
- Extra charges will apply if any risers, air gaps, pigtails, elbows, on/off switches, working in crawl spaces, or custom carpentry work is needed to remove the old unit.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
Range Hood (Ductless) Installation by Quick Contractors
Things to note:
- This service does NOT include haul away and/or disposal of packaging.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
Range Hood (Ducted) Installation by Quick Contractors
Things to note:
- This service does NOT include haul away and/or disposal of packaging.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
Vent Hood or Island Canopy Installation by Quick Contractors
Things to note:
- This package does NOT include moving the existing duct work, or any drywall patching or painting.
- This service does NOT include haul away and/or disposal of packaging.
- If a completely new installation is required please call 1-877-694-3909 or visit quicktask.com/cas to arrange for an on-site quotation. Once the on-site inspection is completed, a Quick Contractors installer will provide a detailed quotation of the work required and the associated cost. The quote includes all necessary plumbing, electrical, and any other trades and permits required to facilitate the completion of the new installation. All fees for an on-site inspection are non-refundable and must be paid for at your local CAS showroom.
The Quick Contractors Installer will:
- Remove packaging from unit and inspect prior to installation
- Disconnect electrical service to existing OTR
- Disconnect Duct
- Mount, center (if possible) and secure support bracket for new OTR as required by manufacturer’s specifics
- Check and rotate, if necessary, exhaust fan, as required for excising ventilation
- Connect and seal to existing duct, if necessary
- Plug OTR cord into receptacle and secure with hardware provided
- Install all accessory filters, covers, panels and/or racks
- Test OTR by activating and monitoring a heating cell (using container filled with water), the exhaust fan and all lights and remaining accessories
- If OTR is mounted using ductless application, installer will ensure accessory charcoal filter is properly installed
Note: All associated packaging of the unit that was installed will be broken down and placed in storage location OR outside as required
Common Overages:
- Dedicated 110-volt electrical line
- Changing a round vent to a rectangular vent OR vice versa
- Installing an electrical receptacle box if improper service was sold
- Additional duct work to allow transition from eternal exhaust to recirculating OR vise versa
- Carpentry work to allow new OTR to fit
The Quick Contractors Installer will:
- Remove packaging from unit and inspect prior to installation
- Set cooktop into opening
- Extend leveling brackets to floor of cabinet so cooktop sits straight
- Secure the cooktop to the countertop
- Screw leveling brackets to bottom of cabinet
- Run appropriate power cable into cabinet
- Connect cooktop to electrical box and receptacle
- Plug cooktop power cord into outlet
- Test Cooktop by activating and monitoring all surface burner elements, all controls, accessories (Clock, timer, setting, etc.)
Note: All associated packaging of the unit that was installed will be broken down and placed in storage location OR outside as required
Common Overages:
- Carpentry work to allow the new appliance to fit
The Quick Contractors Installer will:
- Remove packaging from unit and inspect prior to installation
- Terminate gas service from shut-off valve, verify gas is turned off at shut-off valve and then disconnect gas from appliance. If no shut off valve is present, additional charges can be applied to terminate gas service and install shut-off valve, but not to exceed authorized additional charge estimate provided to customer
- Secure the Cooktop to the countertop
- Screw leveling brackets to bottom of cabinet
- Extend leveling brackets to floor of cabinet so cooktop sits straight
- Connect cooktop to electrical box and receptacle and plug cooktop power cord into outlet
- Run appropriate power cable into cabinet
- Ensure line is capped and there are no leaks
- Connect gas service and ventilation to new gas appliance
- Turn gas service back on and test all connections for leaks
- Monitor gas service and ensure there are no leaks
- Ensure all accessories; (grease, pants, racks, burner faps, lint filter, etc.) are installed on appliance
- Test gas appliance by activating and monitoring all surface burner elements, all controls, accessories (Clock, timer, setting, etc.), all ventilation connections (Check exterior wall cap for debris), Ensure all burner elements are adjusted according to display proper flame characteristics
- Includes new mandatory flex hose required by code
Note: All associated packaging of the unit that was installed will be broken down and placed in storage location OR outside as required
Common Overages:
- Shut off valve
- Conversion kits
- Custom carpentry work to allow the new appliance to fit
The Quick Contractors Installer will:
- A two-person team will install single wall ovens
- Terminate electrical service for electric oven and disconnect from appliance
- Ensure electrical cord has been unplugged to prevent damage to receptacle
- Connect electrical service to new electric oven
- Ensure all accessories (grates, pants, racks, burns caps, etc.) are installed on appliance
- Test wall oven by activating and monitoring all surface burner elements, broiler, oven OR interior heating elements, all controls, accessories (clock, timer, setting, etc.), oven door, storage drawer, and ensure all burner elements are adjusted accordingly
Note: All associated packaging of the unit that was installed will be broken down and placed in storage location OR outside as required
Common Overages:
- Shelf build-up when new unit is shorter than old
- Converting from gas to electric OR vise versa (may require electrician and/ or local gas provider)
- Customer carpentry work to allow new appliance to fit
The Quick Contractors Installer will:
- Un-package and inspect the unit to ensure there are no missing or damaged pieces
- Assembly of the BBQ
- Installation of any accessories such as the ignitor, side burner, etc.
- Review installation and proper operation with customer upon completion
- Final clean up of job site
Note: All associated packaging of the unit that was installed will be broken down and placed in storage location OR outside as required
If you do not see the service you require, please reach out to us. There are a wide arrangement of services available that may not be listed.