Buy multiple Dacor products and save
BRLGJH
MSRP Price
$1,199
0% off
-$2
MSRP Before Promo
$1,198
10% off in-cart!
Why Buy This at CAS?
Ratings & Reviews
BRLGJH
Region Availability:
🛈 *2 - 4 Weeks
When will I get this?
Why Buy This at CAS?
Description & Features
Specs
Manuals
Video
Reviews
Rebates
Warranty
Financing
Install
Delivery
Finish your island or chimney hood installation with the Dacor DHD-D0000IM duct cover extension, a premium hood accessory designed to deliver a seamless, built-in look when your kitchen layout calls for additional chimney height. Created specifically for select Dacor ventilation models in the Graphite Stainless finish, this extension helps bridge the gap between the hood canopy and the ceiling for a clean, architectural presentation that looks intentional—not improvised. Unlike generic duct shrouds that can appear mismatched or require on-site modifications, the DHD-D0000IM is engineered as a genuine, model-matched component so the color, sheen, and fit align with the original hood design for a cohesive statement over your cooking surface. It’s an ideal solution for higher ceilings or custom installations where the standard duct cover doesn’t provide enough vertical coverage, helping conceal ducting and wiring while keeping the overall installation visually refined.
What sets this accessory apart is its purpose-built compatibility and finish coordination: it’s made to pair with Dacor’s Graphite Stainless island hood configurations and is listed as the matching duct cover extension option for those systems, ensuring the final result maintains the same premium aesthetic as the hood itself. Because it’s a dedicated extension kit rather than a one-size-fits-all sleeve, it supports a more precise, professional-looking installation and reduces the guesswork that often comes with aftermarket alternatives. This accessory is also a smart choice for homeowners and designers who want the hood to remain the focal point of the kitchen—without exposed duct runs or awkward transitions near the ceiling. If you’re investing in a luxury ventilation centerpiece, the Dacor DHD-D0000IM helps complete the look with the kind of tailored finishing detail that elevates the entire space.
What sets this accessory apart is its purpose-built compatibility and finish coordination: it’s made to pair with Dacor’s Graphite Stainless island hood configurations and is listed as the matching duct cover extension option for those systems, ensuring the final result maintains the same premium aesthetic as the hood itself. Because it’s a dedicated extension kit rather than a one-size-fits-all sleeve, it supports a more precise, professional-looking installation and reduces the guesswork that often comes with aftermarket alternatives. This accessory is also a smart choice for homeowners and designers who want the hood to remain the focal point of the kitchen—without exposed duct runs or awkward transitions near the ceiling. If you’re investing in a luxury ventilation centerpiece, the Dacor DHD-D0000IM helps complete the look with the kind of tailored finishing detail that elevates the entire space.
• Dacor® duct cover extension kit – genuine hood accessory designed to extend the decorative chimney/duct cover for compatible Dacor island hood installations.
• Graphite Stainless finish match – color-matched accessory intended to coordinate with Graphite Stainless hood finishes for a seamless, built-in look.
• Ceiling-height extension capability – helps accommodate taller ceiling installations by increasing the overall duct-cover/chimney coverage so exposed ducting is concealed.
• Compatible with select Dacor 990I Series island hoods – made to fit specific Dacor hood models that list DHD-D0000IM as the matching duct cover extension accessory.
• Two-piece cover set (upper + lower sections) – provides multiple cover panels that assemble together to create the extended chimney/duct cover.
• Adjustable mounting height support – includes structural supports intended to allow installers to set the duct cover height to suit the final hood mounting position.
• Single-fan and double-fan installation support parts – includes dedicated vertical support components intended to work with both single-motor and dual-motor hood configurations (where applicable to the compatible hood model).
• Inner structure reinforcement supports – includes internal bracing pieces designed to stabilize the extended duct-cover structure and reduce flex during/after installation.
• Installer hardware kit included – includes a large set of mounting screws to help secure supports and duct-cover panels during assembly.
• Torx tool adapter included – includes a Torx 20 adapter to help complete installation steps that require Torx fastening.
• Designed to conceal ducting and wiring – improves kitchen aesthetics by covering the vertical duct run and related connections above the hood canopy.
• Professional-install friendly design – intended to be installed by following the hood’s installation instructions and local code requirements for safe, correct fitment.
• Cut-to-fit flexibility (installer modification) – allows for professional trimming/modification when needed to fine-tune fit for certain ceiling heights or installation constraints.
• Secure fit over hood canopy connection points – designed so the lower duct cover aligns and seats properly at the hood canopy area for a finished appearance.
• Accessory-only purpose (not a ventilation upgrade) – extends the decorative duct cover/chimney height; it does not increase blower power or change airflow performance.
• Helps maintain a consistent “chimney” visual line – supports a clean vertical design from hood canopy to ceiling, especially in open-concept kitchens.
• Residential application accessory – intended for use with residential kitchen ventilation installations (not commercial hood systems).
• Graphite Stainless finish match – color-matched accessory intended to coordinate with Graphite Stainless hood finishes for a seamless, built-in look.
• Ceiling-height extension capability – helps accommodate taller ceiling installations by increasing the overall duct-cover/chimney coverage so exposed ducting is concealed.
• Compatible with select Dacor 990I Series island hoods – made to fit specific Dacor hood models that list DHD-D0000IM as the matching duct cover extension accessory.
• Two-piece cover set (upper + lower sections) – provides multiple cover panels that assemble together to create the extended chimney/duct cover.
• Adjustable mounting height support – includes structural supports intended to allow installers to set the duct cover height to suit the final hood mounting position.
• Single-fan and double-fan installation support parts – includes dedicated vertical support components intended to work with both single-motor and dual-motor hood configurations (where applicable to the compatible hood model).
• Inner structure reinforcement supports – includes internal bracing pieces designed to stabilize the extended duct-cover structure and reduce flex during/after installation.
• Installer hardware kit included – includes a large set of mounting screws to help secure supports and duct-cover panels during assembly.
• Torx tool adapter included – includes a Torx 20 adapter to help complete installation steps that require Torx fastening.
• Designed to conceal ducting and wiring – improves kitchen aesthetics by covering the vertical duct run and related connections above the hood canopy.
• Professional-install friendly design – intended to be installed by following the hood’s installation instructions and local code requirements for safe, correct fitment.
• Cut-to-fit flexibility (installer modification) – allows for professional trimming/modification when needed to fine-tune fit for certain ceiling heights or installation constraints.
• Secure fit over hood canopy connection points – designed so the lower duct cover aligns and seats properly at the hood canopy area for a finished appearance.
• Accessory-only purpose (not a ventilation upgrade) – extends the decorative duct cover/chimney height; it does not increase blower power or change airflow performance.
• Helps maintain a consistent “chimney” visual line – supports a clean vertical design from hood canopy to ceiling, especially in open-concept kitchens.
• Residential application accessory – intended for use with residential kitchen ventilation installations (not commercial hood systems).
Manufacturer's Warranty: 2 years
Canadian model: DHD-D0000IM
Canadian UPC: 847364026297
EAN: 0847364026297
| Specification | Value |
|---|---|
| Model Number | DHD-D0000IM/DA |
| Alternate Model Formatting (as listed by some retailers) | DHDD0000IM/DA (a.k.a. DHDD0000IM) |
| Product Type | Duct Cover Extension Kit |
| Series Compatibility | Dacor 990I Series island range hoods (DHDxxU990I* models) |
| Intended Ceiling Height Range | 9 ft to 12 ft installations |
| Color | Gray |
| Color Finish | Graphite Stainless / Graphite steel (retailer-listed naming) |
| Material | Steel |
| Product Height | 50 15⁄16 inches |
| Product Width | 14 5⁄8 inches |
| Product Weight | 22 lb |
| Adjustable Duct Cover Height Range (General Dimensions) | Min: 51 1⁄4 inches; Max: 79 1⁄4 inches |
| General Dimension B | 14 11⁄16 inches |
| General Dimension C | 16 1⁄2 inches |
| Compatible Hood Models (Graphite Stainless “IM” variants) | DHD36U990IM/DA; DHD42U990IM/DA; DHD54U990IM/DA |
| Notes on Conflicting Retailer Dimensions | Some retailers list different overall dimensions (example listing: 36" H × 51" W × 27" D; another listing shows height 10 1⁄8 inches). Manufacturer installation documentation provides the adjustable height range above. |
There are currently no documents available for this product.
Delivery and installation services are available from CAS
(Includes washers, dryers, and more.)
Delivery and installation service details
Custom advanced installation services (after delivery)
(Gas connections, ventilation, dishwashers, etc.)
Offered by Quick Contractors®
1-877-694-3909
To book service online, please visit quicktask.com/cas
